SimpleRigResetter SSRv2 Watchdog

edited April 20 in Other Hardware
https://shop.simplemining.net/ssrv2.html?___SID=U
https://bitcointalk.org/index.php?topic=1695298.0

You need to create a file on the rig:
/hive-config/watchdog_srrv2.txt
ENABLE=1
SERIAL_NUMBER=000306
SLOT_NUMBER=4

SERIAL_NUMBER - deveice serial number
SLOT_NUMBER - the slot where this rig is connected

After reboot please turn off windows client as it will send pings also.

Comments

  • Изначально подклчается к нему виндовый клиент, настраивается таймаут срабатывания.
    На ригах надо создать файл /hive-config/watchdog_srrv2.txt

    С содержимым:
    ENABLE=1
    SERIAL_NUMBER=000306
    SLOT_NUMBER=4

    Где SERIAL_NUMBER - серийник устройства, SLOT_NUMBER - слот, к которому подключен риг.

    После ребута рига нужно выключить виндовый клиент(в интерфейсе есть отключение), иначе он вместе с ригом будет отправлять "пинги".
    все)
  • DimaFern wrote: »
    After reboot please turn off windows client as it will send pings also.

    What do you mean by this? I would still want to run the Windows SimpleRigResetterTool, correct? And if I have windows mining rigs, I would still want to run the Windows Agent on those, right?
  • I think he mean that you have to turn of the "local agent". This works for me
  • Ok thanks. My HIVE and Windows mining rigs are all working fine. I have a windows non mining rig where I run the SRR Tool and the local agent is not installed there. Then on my windows mining rigs, I only ran the SRR Tool to install the local agents there. Everybody seems to play nice together on the same LAN.
  • Hi guys (devs and customers) - I am "tytanick" and i am from the "competition" :)
    It is very good that hiveOS supports variety of resetters, even mine :)
    I appreciate that.

    Also, we released new keepallive script that also supports new Extension Boards device.
    http://download.simplemining.net/SRR/Agent-linux/keepalive.sh
    This is all i wanted to tell about script.

    About SRRTool. This tool needs only to be run once in order to configure watchdog (to enable watchdog when you connect rigs and to see if it it working corectly).
    Later when you use Hive OS or other OS you do not need to have opened SRRTool program. The properly configured linux script is all that needs to be done on rig.
    OK it also works works with windows and the "Local Agent" tab in SRRTool program is only for windows. If you are using other OS, then do not even look at this tab in program :)

    Also, we had problem sending SRR devices via DHL to Russia to non-commercial customers. But we will test if UPS or other postal services can deliver to Russia individual customers.
    Thanks.
  • Hello since srrv2 got extention board is there a way to edit file to load extention board to because for now it only work with de main board ?
  • edited May 14
    @tytanick or whom has tested this. The srr itself works like a charm. I have just received the extension and have a few questions.
    Latest version of hive still requires to manually install the above scrypt? if so how exactly do i install it? or is it sufficient to add some other line for the extension sn in /hive-config/watchdog_srrv2.txt.

    After this is done, how do i activate hart-beat port binding?
    for the normal srr it's easy port 1 to 8. but srr extension also has port 1-32, how do you correctly map let say port 15 on the extension card?

    Thank You,

  • @jbl200 found a temp patch just run the keepalive.sh script tytanik just post with a cron job at boot on rig plug into the extension board.
Sign In or Register to comment.