Hello all hope your doing fine,
On my rig I have 2x3080 zotac AMP holoblack.
And 4x3070 msi ventus 2x. Power supply 1800watt, Asus z490-p, i3 10gen, 8gb ddr4
I was getting the message “GPU driver error, no temp” quite often until I downgraded Hive image to 0.6-203@210403 and Nvidia drivers to 460. 67.
I changed Thermal pads for one of my 3080 after accidently broken a blade of the right fan I glued it back on with hard glue ( it’s stable like nothing happened)
The rig will run with no errors until it reaches
8 hour and then again it displays the error message and reboot.
My overclock for the zotac 3080 are
- 200 core +1800 mem PL 230w fan 76%
temp 50°c I get 96.5 mhs for both gpus
For the 3070 msi 2x OC are
1100 core 2600 mem pl 125w and 1 3070 pl set at 118w because it was getting hotter than the other 3070s even though they are the same gpus
I get 62. 37 mhs for 3x3070 Temps 48-53°C
and 61.5 mhs for the 3070 temp 55°C
Autofan is disabled, hashrate watchdog disabled also
I’m using Trex miner
I would like to know if my problem is a software issue maybe I should try a different invidia driver or OC settings or a hardware issue (power supply isn’t enough, Risers,ups…)
Will appreciate your help, please let me know what you think
Thank you