Galax GTX 1050 TI EX OC 4GB x 12 GPU Rig Not able to Mine x16r and Beam

1050ti
x16r
#1

I am trying to mine x16r and beam with nicehash but having errors again and again my rig is not stable my config. is i am using hiveos Ver. 0.6-27@190407 with nvidia driver Ver. 418.56 and ccminer, gminer. plz giude me.

#2

please post your miner config OC settings screenshots @hayatullakhan

#3

#4

ccminery-enemy - it’s not the best choice

Use T-Rex or CryptoDredge for x16r

#5

#6

Hardware problems with GPU6 and GPU9

#7

попробуй ETH для этих карт.

#8

Turn off watchdog
check power connectors
check cards are properly installed on riser

the best and worst thing to troubleshoot is, connect card1, run miner works fine for 5 min, then shutdown , connect second card then run miner for 5 min, then shutdown and keep doing it card by card

it is a long process and annoying and waste of time, but you have to do it if u have the time

#9

У меня работает нормально сам пере запускается и стартует

#10


нанопул ETH

#11

У меня есть манета BSD.
Установил полетный лист.


Только он не работает, ни чего не добывает, выдает ошибка.
Как настроить???

#12

I Replace all 12 risers know rig is stable on ETH and Beam but still having the same Problem with X16R Algo.

#13

почему не копается манета