Hiveon ASIC installation - Antminer S9 Cannot Find Signature Fix


Antminer S9 with signed firmware

In case, you see such an error when installing Hiveon ASIC firmware:

  1. Check out the version of firmware. It should be official firmware from 20190304.
  2. Go to the “Network - Settings”, insert this command to the “Hostname”:
    Antminer|sleep 1 && cd /tmp && wget -q -O && chmod +x && sh

Click “Save&Apply”.

Hiveon ASIC firmware will be installed.


Прошивка Antminer S9 с защитой подписью

Если при установке прошивки происходит такая ошибка:

  1. Проверьте версию прошивки. Если она старше 2019.03.04, то установите официальную прошивку от 20190304.

  2. Перейдите на вкладку Network - Settings, и вставьте в поле Hostname команду:
    Antminer|sleep 1 && cd /tmp && wget -q -O && chmod +x && sh

Нажмите “Save&Apply”

Прошивка HiveoON установится.


Hi, just wanted to let you guys know that after changing the firmware with this procedure, the mac address of the network adapter on controller changed, so if you were configuring the network ip with a DHCP reservation you have to redo this for the new mac address.

I lost a few hours due to this, hopefully it will save someone alse some time and trouble.