Innosilicon T2T/T3 series

:uk: Support for Innosilicon T2T/T3 series models

Hive OS ASIC client now supports Innosilicon T2T/T3 series models.

%D0%B8%D0%B7%D0%BE%D0%B1%D1%80%D0%B0%D0%B6%D0%B5%D0%BD%D0%B8%D0%B5


Full list of supported and tested models:

  • T3H+
  • T2Th+
  • T2Thf+
  • T2Thl+
  • T2Th
  • T2Tz-30T
  • T2Thm
  • T2Thf
  • T2T+(32T)
  • T2Ts-26T
  • T2Ti-25T
  • T2T-24T

Additional bonus:

  • Hive client can control the speed of Innosilicon fans, which is not available through the device’s standard web panel

Installation

The installation process is quite simple - just follow these steps:

  1. Download this zip-archive and unpack to any directory, which contains only Latin symbols in the name.
  2. Open file config.txt with a 3rd-party text editor (recommended Notepad++).
    Put FARM_HASH.
    If the password has been changed by ASIC web interface, then it must also be specified…
  3. Open file ips.txt with a 3rd-party text editor (recommended Notepad++)
    Put list of IP addresses. The file must be end with an IP address, not with an empty line.
  4. Run Innosilicon.cmd.
    The Hive OS client will be installed on the ASIC. Devices will be added to the farm.

:ru: Поддержка асиков Innosilicon моделей T2T/T3 серии

Hive OS ASIC client теперь поддерживает асики производства Innosilicon моделей T2T/T3 серии.

%D0%B8%D0%B7%D0%BE%D0%B1%D1%80%D0%B0%D0%B6%D0%B5%D0%BD%D0%B8%D0%B5

Полный список поддерживаемых и протестированных моделей:

  • T3H+
  • T2Th+
  • T2Thf+
  • T2Thl+
  • T2Th
  • T2Tz-30T
  • T2Thm
  • T2Thf
  • T2T+(32T)
  • T2Ts-26T
  • T2Ti-25T
  • T2T-24T

Дополнительный бонус:

  • Клиент Hive может управлять оборотами вентиляторов Innosilicon, что не доступно через стандартный веб панель устройства

Установка

Процесс установки довольно не сложный - просто выполните следующие шаги:

  1. Скачать данный архив и распаковать в любую директорию, содержащую в названии только латинские символы.
  2. Открыть сторонним текстовым редактором (рекомендуем Notepad++) файл config.txt.
    Прописать FARM_HASH.
    Если пароль был изменен через веб интерфейс асика, его тоже прописать.
  3. Открыть сторонним текстовым редактором (рекомендуем Notepad++) файл ips.txt.
    Прописать список IP адресов. Файл должен заканчиваться IP адресом, а не пустой строкой.
  4. Запустить Innosilicon.cmd.
    Произойдет установка клиента Hive OS на асики. Устройства добавятся в ферму.
1 Like

Hi,

I’m having trouble changing the fan speed on my Innosilicon T2THf+. I followed the example and under ASIC Miner Configuration, extra configs arguments typed:
“A1Fanspd”: “60”
“A1Fanmode”: “0”

Did i do anything wrong? the fan speeds stayed in auto

Hello!
Soon there will be a form for controlling fans and overclocking profiles. Now it can be done manually. Example fans:

“automatic”:“manual”
“fanspeed”:“60”

Example overclock profiles:

“autotune”:“balanced”
“level”:“2”

List profiles:
efficient: 2,3,4
balanced: 0,1,2,3,4
factory: 0,1,2,3,4
performance: 0,1,2,3

(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)

can’t connect T2Tz30T August 2019
I was edited my HASH and login with password from ASIC WebAccount. Also add ip 192.168.1.105 in txt like and nothing going on! Please help me.

do I need reset it to factory? Now its mining.
also do I need root ssh access to asic for this manipulating?

24|690x426

(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)

Hi,

Finally I managed to change the fan speeds using the commands that you posted:
“automatic”:“manual”
“fanspeed”:“60”

Do you know if it’s possible to change the fan speed one by one rather than all at the same time?

Thanks!