lolMiner v1.32 Beta unlock LHR

lolMiner v1.32

  • Beta functionality: Added RTX 3000 series semi-unlock for LHR v2 cards which offers up to 30% more performance than locked state. Use --mode LHR2 to call it and --mode LHR1 for 3060 LHR1 cards. Also added a low power LHR mode for V2 cards - LHRLP mode. Recommended drivers for LHR2 and LHRLP: 470.63.01 or 465
  • improved performance of the semi-unlock RTX 3060 LHR v1 by 2-3% depending on the configuration - at the same low power consumption
2 Likes

–mode LHR2
–devices NVIDIA

1 Like

I have a rig with 3060s (LHR 1) and 3070 (without LHR).
On 1.31 and 3060s I had 38,5 MH. Version 1.32 gives me 39,5 MH (I mean LOL v1.32 included in hive 0.6-210@210913 because 1.32 included in 0.6-210@210912 gave 26 MH) but my unlocked 3070 gives only about 40MH on this version. Looks like there is bug in this version commiting unlocked cards does not work at 100%.

3 Likes

–mode LHR2

2 Likes

IT ALSO GIVES ME TO ME THIS PROBLEM IS A BUG, ACCORDING TO ME, THE COMMAND FOR SINGLE BOARD MUST BE IMPLEMENTED.
THE COMMAND IS TAKEN INSTEAD IN ALL GPUs.
CONSIDER THAT AND BETA AND THEY WILL FIX IT

I agree. I went back to 1.31 and will be waiting for new version.

my god that cards are waste of time with that power spend, my 3060 ti founders edition kicks 62.9 mh/s on 120 W !

But your card is not LHR right?
Anyway 3080ti is much more profitable with ERG or RVN.

my card is non LHR but i think profit wise, it will be the same as (ti) on ergo or ravencoin. i think on that coins people will benefit the cool cards i heard that raven makes cards very warm.

No it is not the same. Your 3060ti non lhr can get 170MH on ergo while 3060ti LHR will be in range 135-140 MH with similar power consumption about 125W.
Kawpow algoritm (RVN) is power hungry. For example my 3080 ti use about 225W mining ERG (265 MH). If I change to RVN power usage raise to about 360W. More watts mean more heat. No doubt about it.

1 Like

someone tested a rtx 3070 v2 LHR ? :slight_smile:

Direct in mobo around 43-44Mhs, with riser around 42Mhs…

I need help on this.
I have a rig with 2 3080 and 2 3070 NON LHR
Added a 3080ti and can’t get the —mode LHR2 to work at all on the 3080ti.
I did update nvidia drivers. However when I add the mode LHR2 it crushes the MH on the other cards and 3080ti won’t work

need help on this.
I have a rig with 2 3080 and 2 3070 NON LHR
Added a 3080ti and can’t get the —mode LHR2 to work at all on the 3080ti.
I did update nvidia drivers. However when I add the mode LHR2 it crushes the MH on the other cards and 3080ti won’t work

1 Like

Use NBminer v 39.2 and much better x now!
Lolminer still in beta test
It works them

1 Like

Wow! What are your 3080, 3070 and 3080ti settings?? How are you getting 101 with 3080
I’m getting 97 3080 and 60 on 3070

1 Like

:point_down::point_down::point_down::point_down::point_down::point_down::point_down::point_down::point_down:

Stable? Holy hell

1 Like

Same here x7 3080ti

si è stabile il mio. poi dipende dalle tue schede devi fare le tue prove.