"no-carrier" after successfully logging in

Hi, I’m using Tp-Link tx3000e with intel chipset ax200. Everytime i try to connect to my hotspot, hiveos return “no-carrier” with error wifi setup done. No connection. Check settings and try again." Thx for your help !

Does the TP have a UI and logs? It’s very likely a negotiation problem.

I’m a beginer on linux so i dont know. Where i can find this info ?

No worries, we all start somewhere.
From the webpage for the rig, along the top ribbon you will see an option to send a command. Run the command “dmesg” and look for messages in the command output (once it completes, it will take a few mins - for whatever reason this is super slow when it’s lightning quick in a terminal)… regarding how the wifi connection crapped out.

Another quick suggestion - are you current with your OS patches? You will need to hardwire in to update… Not likely, but may be of value to check your tplink and mainboard.

If you are adventurous, start a terminal session. Here are some wifi commands (hint, the #is your command prompt you all didn’t need that),


Look for something starting with “wlp” and numbers in the right most column. This is your wifi device. If this returns nothing… thats a different starting point.

iwlist wlp scan

Will output all the networks broadcasting.

If your device wasn’t found with ifconfig, and you didn’t see the device load in dmesg… I’m not sure.

Checking the Googler seems to be a mixed bag regarding support. One person reports it needs kernel 5.1 and “HiveOS” runs 5.0. Updating the kernel while simple to do has a huge amount of considerations dramatically complicating the decision.


Let us know what you find…
Good luck