OS freezing and booting by itself

Hello everyone. I’m new here and I must confess that I am a noob. I don’t know UNIX based systems and sorry if I say something wrong.

Weeks ago my system freezeed some times in a day. It was completely random and the freezing often occurred at night. Searching for a solution I figured out that I would need to enable my Bios virtualization. It worked fine and my OS never stopped again.

Occurs that now my OS is just rebooting constantly (many times in a Day). In the HiveOS, the screen shows me:

This is hardware configuration:

MOBA: Asus Crosshair VI AMD
Processor: AMD Ryzen 5 1600x
Memory: 1x Corsair Vengeance 16MB DDR4 3200MHz
2x Power Supply Corsair 1000w
GPUs: 1x Asus GTX 1080 TI Strix; 1x MSI GTX 1080 TI Gaming and 1x Asus RTX 3070 Strix.

Before each rebooting, my hash rate simplely down. Sometimes the OS initiate with all GPUs working, but sometimes not. In the log I can see this same message ever: [ 4.984681] sp5100-tco sp5100-tco: Watchdog hardware is disabled. That is normal or is linked with rebooting problem?

Thank you for any help!


LOG:

root@Klaus:/# dmesg
(…)
[ 0.173099] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173142] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173178] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173222] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173262] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173295] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173327] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173359] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.173750] ACPI: EC: interrupt unblocked
[ 0.173769] ACPI: EC: event unblocked
[ 0.173778] ACPI: _SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.173780] ACPI: _SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.173825] iommu: Default domain type: Translated
[ 0.173825] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.173825] pci 0000:0a:00.0: vgaarb: setting as boot VGA device
[ 0.173825] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.173825] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.173825] pci 0000:08:00.0: vgaarb: bridge control possible
[ 0.173825] pci 0000:0a:00.0: vgaarb: bridge control possible
[ 0.173825] pci 0000:0b:00.0: vgaarb: bridge control possible
[ 0.173825] vgaarb: loaded
[ 0.173825] SCSI subsystem initialized
[ 0.173825] libata version 3.00 loaded.
[ 0.173825] ACPI: bus type USB registered
[ 0.173825] usbcore: registered new interface driver usbfs
[ 0.173825] usbcore: registered new interface driver hub
[ 0.173825] usbcore: registered new device driver usb
[ 0.173825] EDAC MC: Ver: 3.0.0
[ 0.173825] Registered efivars operations
[ 0.173825] PCI: Using ACPI for IRQ routing
[ 0.179385] PCI: pci_cache_line_size set to 64 bytes
[ 0.179456] e820: reserve RAM buffer [mem 0x09e00000-0x0bffffff]
[ 0.179456] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.179457] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.179457] e820: reserve RAM buffer [mem 0x6095b018-0x63ffffff]
[ 0.179458] e820: reserve RAM buffer [mem 0x6097b018-0x63ffffff]
[ 0.179458] e820: reserve RAM buffer [mem 0x609a2018-0x63ffffff]
[ 0.179459] e820: reserve RAM buffer [mem 0x609c2018-0x63ffffff]
[ 0.179459] e820: reserve RAM buffer [mem 0x86506000-0x87ffffff]
[ 0.179460] e820: reserve RAM buffer [mem 0x8740a000-0x87ffffff]
[ 0.179460] e820: reserve RAM buffer [mem 0x89cf3000-0x8bffffff]
[ 0.179461] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[ 0.179461] e820: reserve RAM buffer [mem 0x46f380000-0x46fffffff]
[ 0.179532] NetLabel: Initializing
[ 0.179534] NetLabel: domain hash size = 128
[ 0.179535] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.179546] NetLabel: unlabeled traffic allowed by default
[ 0.179555] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.179555] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.181051] clocksource: Switched to clocksource tsc-early
[ 0.189128] VFS: Disk quotas dquot_6.6.0
[ 0.189149] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.189263] AppArmor: AppArmor Filesystem Enabled
[ 0.189280] pnp: PnP ACPI init
[ 0.189420] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.189427] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.189488] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.189608] system 00:02: [io 0x02a0-0x02af] has been reserved
[ 0.189610] system 00:02: [io 0x0230-0x023f] has been reserved
[ 0.189613] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.189616] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.189803] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.189806] system 00:03: [io 0x040b] has been reserved
[ 0.189808] system 00:03: [io 0x04d6] has been reserved
[ 0.189810] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.189812] system 00:03: [io 0x0c14] has been reserved
[ 0.189814] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.189816] system 00:03: [io 0x0c52] has been reserved
[ 0.189817] system 00:03: [io 0x0c6c] has been reserved
[ 0.189819] system 00:03: [io 0x0c6f] has been reserved
[ 0.189821] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.189823] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.189825] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.189827] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.189828] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.189830] system 00:03: [io 0x0800-0x089f] has been reserved
[ 0.189832] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.189834] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.189836] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.189837] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.189840] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.189842] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.189845] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.189847] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.189849] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.189852] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.189854] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[ 0.189857] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.190179] pnp: PnP ACPI: found 4 devices
[ 0.191311] thermal_sys: Registered thermal governor ‘fair_share’
[ 0.191312] thermal_sys: Registered thermal governor ‘bang_bang’
[ 0.191314] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.191316] thermal_sys: Registered thermal governor ‘user_space’
[ 0.191317] thermal_sys: Registered thermal governor ‘power_allocator’
[ 0.195833] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.195869] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.195874] pci 0000:02:00.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.195882] pci 0000:02:02.0: PCI bridge to [bus 04]
[ 0.195885] pci 0000:02:02.0: bridge window [io 0xc000-0xcfff]
[ 0.195890] pci 0000:02:02.0: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.195897] pci 0000:02:03.0: PCI bridge to [bus 05]
[ 0.195906] pci 0000:02:04.0: PCI bridge to [bus 06]
[ 0.195916] pci 0000:02:05.0: PCI bridge to [bus 07]
[ 0.195926] pci 0000:02:06.0: PCI bridge to [bus 08]
[ 0.195928] pci 0000:02:06.0: bridge window [io 0xb000-0xbfff]
[ 0.195933] pci 0000:02:06.0: bridge window [mem 0xf1000000-0xf20fffff]
[ 0.195937] pci 0000:02:06.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.195942] pci 0000:02:07.0: PCI bridge to [bus 09]
[ 0.195952] pci 0000:01:00.2: PCI bridge to [bus 02-09]
[ 0.195954] pci 0000:01:00.2: bridge window [io 0xb000-0xcfff]
[ 0.195958] pci 0000:01:00.2: bridge window [mem 0xf1000000-0xf23fffff]
[ 0.195962] pci 0000:01:00.2: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.195968] pci 0000:00:01.3: PCI bridge to [bus 01-09]
[ 0.195970] pci 0000:00:01.3: bridge window [io 0xb000-0xcfff]
[ 0.195973] pci 0000:00:01.3: bridge window [mem 0xf1000000-0xf24fffff]
[ 0.195976] pci 0000:00:01.3: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.195980] pci 0000:00:03.1: PCI bridge to [bus 0a]
[ 0.195982] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.195985] pci 0000:00:03.1: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.195988] pci 0000:00:03.1: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.195992] pci 0000:00:03.2: PCI bridge to [bus 0b]
[ 0.195994] pci 0000:00:03.2: bridge window [io 0xd000-0xdfff]
[ 0.195997] pci 0000:00:03.2: bridge window [mem 0xf3000000-0xf40fffff]
[ 0.195999] pci 0000:00:03.2: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.196004] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.196006] pci 0000:00:07.1: bridge window [mem 0xf6200000-0xf64fffff]
[ 0.196011] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.196014] pci 0000:00:08.1: bridge window [mem 0xf6500000-0xf65fffff]
[ 0.196020] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.196022] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.196024] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.196026] pci_bus 0000:00: resource 7 [io 0x0d00-0xefff window]
[ 0.196028] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.196030] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.196032] pci_bus 0000:00: resource 10 [mem 0x90000000-0xfec2ffff window]
[ 0.196034] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.196036] pci_bus 0000:01: resource 0 [io 0xb000-0xcfff]
[ 0.196038] pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf24fffff]
[ 0.196040] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.196042] pci_bus 0000:02: resource 0 [io 0xb000-0xcfff]
[ 0.196044] pci_bus 0000:02: resource 1 [mem 0xf1000000-0xf23fffff]
[ 0.196046] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.196048] pci_bus 0000:03: resource 1 [mem 0xf2300000-0xf23fffff]
[ 0.196050] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.196052] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.196054] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
[ 0.196056] pci_bus 0000:08: resource 1 [mem 0xf1000000-0xf20fffff]
[ 0.196057] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 0.196060] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
[ 0.196061] pci_bus 0000:0a: resource 1 [mem 0xf5000000-0xf60fffff]
[ 0.196063] pci_bus 0000:0a: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.196065] pci_bus 0000:0b: resource 0 [io 0xd000-0xdfff]
[ 0.196067] pci_bus 0000:0b: resource 1 [mem 0xf3000000-0xf40fffff]
[ 0.196069] pci_bus 0000:0b: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[ 0.196071] pci_bus 0000:0c: resource 1 [mem 0xf6200000-0xf64fffff]
[ 0.196073] pci_bus 0000:0d: resource 1 [mem 0xf6500000-0xf65fffff]
[ 0.196134] NET: Registered protocol family 2
[ 0.196274] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.196297] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.196430] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.196574] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.196625] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.196660] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.196791] NET: Registered protocol family 1
[ 0.197040] pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
[ 0.197054] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.197109] pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
[ 0.197147] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
[ 0.197265] PCI: CLS 64 bytes, default 64
[ 0.197303] Trying to unpack rootfs image as initramfs…
[ 0.591956] Freeing initrd memory: 40140K
[ 0.592005] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.592008] software IO TLB: mapped [mem 0x82506000-0x86506000] (64MB)
[ 0.592138] amd_uncore: AMD NB counters detected
[ 0.592144] amd_uncore: AMD LLC counters detected
[ 0.592380] check: Scanning for low memory corruption every 60 seconds
[ 0.592860] Initialise system trusted keyrings
[ 0.592900] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.593754] zbud: loaded
[ 0.593987] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.594118] fuse: init (API version 7.31)
[ 0.597268] Key type asymmetric registered
[ 0.597271] Asymmetric key parser ‘x509’ registered
[ 0.597280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.597323] io scheduler mq-deadline registered
[ 0.597324] io scheduler kyber registered
[ 0.599756] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.599771] ACPI: Power Button [PWRB]
[ 0.599792] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.599816] ACPI: Power Button [PWRF]
[ 0.599848] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.599912] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600003] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600072] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600180] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600272] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600332] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600412] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600498] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600571] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600657] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600735] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.600896] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.621832] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.622697] Linux agpgart interface v0.103
[ 0.625771] loop: module loaded
[ 0.625906] libphy: Fixed MDIO Bus: probed
[ 0.625908] tun: Universal TUN/TAP device driver, 1.6
[ 0.625929] PPP generic driver version 2.4.2
[ 0.625959] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.625964] ehci-pci: EHCI PCI platform driver
[ 0.625972] ehci-platform: EHCI generic platform driver
[ 0.625978] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.625980] ohci-pci: OHCI PCI platform driver
[ 0.625986] ohci-platform: OHCI generic platform driver
[ 0.625990] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.626051] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.626056] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.681460] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010008000410
[ 0.681586] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.681589] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.681592] usb usb1: Product: xHCI Host Controller
[ 0.681593] usb usb1: Manufacturer: Linux 5.4.0-hiveos xhci-hcd
[ 0.681595] usb usb1: SerialNumber: 0000:01:00.0
[ 0.681686] hub 1-0:1.0: USB hub found
[ 0.681701] hub 1-0:1.0: 14 ports detected
[ 0.686110] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.686114] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.686117] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.686148] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 0.686162] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.686165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686167] usb usb2: Product: xHCI Host Controller
[ 0.686168] usb usb2: Manufacturer: Linux 5.4.0-hiveos xhci-hcd
[ 0.686170] usb usb2: SerialNumber: 0000:01:00.0
[ 0.686235] hub 2-0:1.0: USB hub found
[ 0.686246] hub 2-0:1.0: 8 ports detected
[ 0.688832] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.688837] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.747741] xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
[ 0.747940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.747946] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.747949] usb usb3: Product: xHCI Host Controller
[ 0.747951] usb usb3: Manufacturer: Linux 5.4.0-hiveos xhci-hcd
[ 0.747953] usb usb3: SerialNumber: 0000:03:00.0
[ 0.748033] hub 3-0:1.0: USB hub found
[ 0.748041] hub 3-0:1.0: 2 ports detected
[ 0.748164] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.748168] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.748171] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.748196] usb usb4: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 0.748212] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.748215] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.748218] usb usb4: Product: xHCI Host Controller
[ 0.748220] usb usb4: Manufacturer: Linux 5.4.0-hiveos xhci-hcd
[ 0.748222] usb usb4: SerialNumber: 0000:03:00.0
[ 0.748281] hub 4-0:1.0: USB hub found
[ 0.748288] hub 4-0:1.0: 2 ports detected
[ 0.748420] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 0.748425] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 5
[ 0.748515] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
[ 0.748598] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.748600] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.748602] usb usb5: Product: xHCI Host Controller
[ 0.748604] usb usb5: Manufacturer: Linux 5.4.0-hiveos xhci-hcd
[ 0.748606] usb usb5: SerialNumber: 0000:0c:00.3
[ 0.748666] hub 5-0:1.0: USB hub found
[ 0.748673] hub 5-0:1.0: 4 ports detected
[ 0.748789] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 0.748793] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 6
[ 0.748796] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed
[ 0.748805] usb usb6: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 0.748818] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.748820] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.748822] usb usb6: Product: xHCI Host Controller
[ 0.748824] usb usb6: Manufacturer: Linux 5.4.0-hiveos xhci-hcd
[ 0.748825] usb usb6: SerialNumber: 0000:0c:00.3
[ 0.748883] hub 6-0:1.0: USB hub found
[ 0.748889] hub 6-0:1.0: 4 ports detected
[ 0.748995] i8042: PNP: No PS/2 controller found.
[ 0.749036] mousedev: PS/2 mouse device common for all mice
[ 0.749121] rtc_cmos 00:01: RTC can wake from S4
[ 0.749379] rtc_cmos 00:01: registered as rtc0
[ 0.749391] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.749397] i2c /dev entries driver
[ 0.749423] device-mapper: uevent: version 1.0.3
[ 0.749460] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.749589] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.749593] EFI Variables Facility v0.08 2004-May-17
[ 0.768870] drop_monitor: Initializing network drop monitor service
[ 0.768918] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.768921] NET: Registered protocol family 17
[ 0.768959] Key type dns_resolver registered
[ 0.769564] microcode: CPU0: patch_level=0x08001138
[ 0.769570] microcode: CPU1: patch_level=0x08001138
[ 0.769577] microcode: CPU2: patch_level=0x08001138
[ 0.769584] microcode: CPU3: patch_level=0x08001138
[ 0.769593] microcode: CPU4: patch_level=0x08001138
[ 0.769599] microcode: CPU5: patch_level=0x08001138
[ 0.769604] microcode: CPU6: patch_level=0x08001138
[ 0.769610] microcode: CPU7: patch_level=0x08001138
[ 0.769615] microcode: CPU8: patch_level=0x08001138
[ 0.769621] microcode: CPU9: patch_level=0x08001138
[ 0.769626] microcode: CPU10: patch_level=0x08001138
[ 0.769633] microcode: CPU11: patch_level=0x08001138
[ 0.769656] microcode: Microcode Update Driver: v2.2.
[ 0.769659] IPI shorthand broadcast: enabled
[ 0.769669] sched_clock: Marking stable (797646279, -27993518)->(802343581, -32690820)
[ 0.769785] registered taskstats version 1
[ 0.769795] Loading compiled-in X.509 certificates
[ 0.770312] Loaded X.509 cert ‘Build time autogenerated kernel key: 8b5898271c79f33560447ae79228f1999b0ebd47’
[ 0.770331] zswap: loaded using pool lzo/zbud
[ 0.770434] Key type ._fscrypt registered
[ 0.770436] Key type .fscrypt registered
[ 0.772251] Key type big_key registered
[ 0.773052] Key type encrypted registered
[ 0.773057] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.773063] ima: No TPM chip found, activating TPM-bypass!
[ 0.773070] ima: Allocated hash algorithm: sha1
[ 0.773077] ima: No architecture policies found
[ 0.773084] evm: Initialising EVM extended attributes:
[ 0.773086] evm: security.selinux
[ 0.773087] evm: security.SMACK64
[ 0.773089] evm: security.SMACK64EXEC
[ 0.773090] evm: security.SMACK64TRANSMUTE
[ 0.773092] evm: security.SMACK64MMAP
[ 0.773093] evm: security.apparmor
[ 0.773094] evm: security.ima
[ 0.773096] evm: security.capability
[ 0.773097] evm: HMAC attrs: 0x1
[ 0.773438] PM: Magic number: 9:693:737
[ 0.773587] rtc_cmos 00:01: setting system clock to 2021-06-07T14:44:55 UTC (1623077095)
[ 0.773763] acpi_cpufreq: overriding BIOS provided _PSD data
[ 0.775341] Freeing unused kernel image memory: 2500K
[ 0.792974] Write protecting the kernel read-only data: 22528k
[ 0.793513] Freeing unused kernel image memory: 2012K
[ 0.793631] Freeing unused kernel image memory: 368K
[ 0.800892] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.800896] Run /init as init process
[ 0.846774] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 0.852994] pps_core: LinuxPPS API ver. 1 registered
[ 0.852999] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.853760] PTP clock support registered
[ 0.854008] ahci 0000:01:00.1: version 3.0
[ 0.854169] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 0.854228] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.854234] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.854430] dca service started, version 1.12.1
[ 0.854925] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 0.854929] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 0.855028] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 0.855890] scsi host0: ahci
[ 0.858535] igb: Intel® Gigabit Ethernet Network Driver - version 5.6.0-k
[ 0.858538] igb: Copyright © 2007-2014 Intel Corporation.
[ 0.860891] scsi host1: ahci
[ 0.861259] scsi host2: ahci
[ 0.861388] scsi host3: ahci
[ 0.861562] scsi host4: ahci
[ 0.861654] scsi host5: ahci
[ 0.865921] scsi host6: ahci
[ 0.866011] scsi host7: ahci
[ 0.866050] ata1: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480100 irq 45
[ 0.866053] ata2: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480180 irq 45
[ 0.866056] ata3: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480200 irq 45
[ 0.866059] ata4: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480280 irq 45
[ 0.866062] ata5: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480300 irq 45
[ 0.866065] ata6: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480380 irq 45
[ 0.866067] ata7: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480400 irq 45
[ 0.866070] ata8: SATA max UDMA/133 abar m131072@0xf2480000 port 0xf2480480 irq 45
[ 0.866260] ahci 0000:0d:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.866264] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.866403] scsi host8: ahci
[ 0.866445] ata9: SATA max UDMA/133 abar m4096@0xf6508000 port 0xf6508100 irq 52
[ 0.889769] pps pps0: new PPS source ptp0
[ 0.889797] igb 0000:04:00.0: added PHC on eth0
[ 0.889799] igb 0000:04:00.0: Intel® Gigabit Ethernet Network Connection
[ 0.889802] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 60:45:cb:9b:d1:31
[ 0.889804] igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
[ 0.889806] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 1.064037] usb 5-3: new full-speed USB device number 2 using xhci_hcd
[ 1.162615] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.167120] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.234506] usb 5-3: New USB device found, idVendor=046d, idProduct=c53f, bcdDevice=44.01
[ 1.234513] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.234516] usb 5-3: Product: USB Receiver
[ 1.234518] usb 5-3: Manufacturer: Logitech
[ 1.252043] hidraw: raw HID events driver © Jiri Kosina
[ 1.292963] usbcore: registered new interface driver usbhid
[ 1.292966] usbhid: USB HID core driver
[ 1.313459] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-3/5-3:1.0/0003:046D:C53F.0001/input/input2
[ 1.340224] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.369328] usb 6-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
[ 1.369334] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.369337] usb 6-1: Product: SanDisk 3.2Gen1
[ 1.369338] usb 6-1: Manufacturer: USB
[ 1.369340] usb 6-1: SerialNumber: 0401a04a59594e0c6dca5ab4971ec3f5036fe255a966afe5677884622a68d9df1a2400000000000000000000b6a6d81d00066e1883558107b4292584
[ 1.372013] usb-storage 6-1:1.0: USB Mass Storage device detected
[ 1.372096] hid-generic 0003:046D:C53F.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0c:00.3-3/input0
[ 1.372122] scsi host9: usb-storage 6-1:1.0
[ 1.372180] usbcore: registered new interface driver usb-storage
[ 1.372302] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-3/5-3:1.1/0003:046D:C53F.0002/input/input3
[ 1.372380] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-3/5-3:1.1/0003:046D:C53F.0002/input/input4
[ 1.373082] usbcore: registered new interface driver uas
[ 1.432269] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-3/5-3:1.1/0003:046D:C53F.0002/input/input5
[ 1.432350] hid-generic 0003:046D:C53F.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0c:00.3-3/input1
[ 1.432507] hid-generic 0003:046D:C53F.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0c:00.3-3/input2
[ 1.474942] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.492038] usb 5-4: new full-speed USB device number 3 using xhci_hcd
[ 1.528671] logitech-djreceiver 0003:046D:C53F.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0c:00.3-3/input0
[ 1.600042] tsc: Refined TSC clocksource calibration: 3593.249 MHz
[ 1.600055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb698e952, max_idle_ns: 440795267109 ns
[ 1.600295] clocksource: Switched to clocksource tsc
[ 1.660890] usb 5-4: New USB device found, idVendor=1532, idProduct=0221, bcdDevice= 2.00
[ 1.660895] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.660898] usb 5-4: Product: Razer BlackWidow Chroma V2
[ 1.660901] usb 5-4: Manufacturer: Razer
[ 1.679063] input: Razer Razer BlackWidow Chroma V2 as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-4/5-4:1.0/0003:1532:0221.0004/input/input7
[ 1.708347] logitech-djreceiver 0003:046D:C53F.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0c:00.3-3/input1
[ 1.768309] hid-generic 0003:1532:0221.0004: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow Chroma V2] on usb-0000:0c:00.3-4/input0
[ 1.768431] logitech-djreceiver 0003:046D:C53F.0003: hiddev1,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0c:00.3-3/input2
[ 1.774833] input: Razer Razer BlackWidow Chroma V2 Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-4/5-4:1.1/0003:1532:0221.0005/input/input8
[ 1.791585] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.829888] logitech-djreceiver 0003:046D:C53F.0003: device of type eQUAD Lightspeed 1.1 (0x0d) connected on slot 1
[ 1.830180] input: Logitech Wireless Mouse PID:4074 Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-3/5-3:1.2/0003:046D:C53F.0003/0003:046D:4074.0006/input/input12
[ 1.832124] input: Razer Razer BlackWidow Chroma V2 Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-4/5-4:1.1/0003:1532:0221.0005/input/input9
[ 1.832171] input: Logitech Wireless Mouse PID:4074 Mouse as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-3/5-3:1.2/0003:046D:C53F.0003/0003:046D:4074.0006/input/input13
[ 1.832192] input: Razer Razer BlackWidow Chroma V2 System Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-4/5-4:1.1/0003:1532:0221.0005/input/input10
[ 1.832275] hid-generic 0003:046D:4074.0006: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Mouse PID:4074] on usb-0000:0c:00.3-3/input2:1
[ 1.832284] input: Razer Razer BlackWidow Chroma V2 as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-4/5-4:1.1/0003:1532:0221.0005/input/input11
[ 1.832328] hid-generic 0003:1532:0221.0005: input,hidraw5: USB HID v1.11 Keyboard [Razer Razer BlackWidow Chroma V2] on usb-0000:0c:00.3-4/input1
[ 1.837094] input: Razer Razer BlackWidow Chroma V2 as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-4/5-4:1.2/0003:1532:0221.0007/input/input17
[ 1.928674] hid-generic 0003:1532:0221.0007: input,hidraw4: USB HID v1.11 Mouse [Razer Razer BlackWidow Chroma V2] on usb-0000:0c:00.3-4/input2
[ 1.936946] input: Logitech G305 as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb5/5-3/5-3:1.2/0003:046D:C53F.0003/0003:046D:4074.0006/input/input18
[ 1.937232] logitech-hidpp-device 0003:046D:4074.0006: input,hidraw6: USB HID v1.11 Keyboard [Logitech G305] on usb-0000:0c:00.3-3/input2:1
[ 2.104333] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.402141] scsi 9:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[ 2.402361] sd 9:0:0:0: Attached scsi generic sg0 type 0
[ 2.402718] sd 9:0:0:0: [sda] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 2.404139] sd 9:0:0:0: [sda] Write Protect is off
[ 2.404144] sd 9:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2.404623] sd 9:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.420919] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.442906] sda: sda1 sda2 sda3 sda4
[ 2.444375] sd 9:0:0:0: [sda] Attached SCSI removable disk
[ 2.447655] random: fast init done
[ 2.732446] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.048918] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.360565] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.442075] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.482691] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.941044] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.960543] systemd[1]: Detected architecture x86-64.
[ 3.994249] systemd[1]: Set hostname to .
[ 4.483712] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.483854] systemd[1]: Created slice System Slice.
[ 4.483932] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.483961] systemd[1]: Listening on udev Kernel Socket.
[ 4.483991] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.484027] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.484086] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.484138] systemd[1]: Listening on Syslog Socket.
[ 4.484197] systemd[1]: Listening on udev Control Socket.
[ 4.484287] systemd[1]: Listening on Journal Audit Socket.
[ 4.575919] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=120
[ 4.606801] RPC: Registered named UNIX socket transport module.
[ 4.606804] RPC: Registered udp transport module.
[ 4.606806] RPC: Registered tcp transport module.
[ 4.606808] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.628767] droptcpsock: loading out-of-tree module taints kernel.
[ 4.628792] droptcpsock: module verification failed: signature and/or required key missing - tainting kernel
[ 4.984600] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 4.984671] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 4.984681] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 5.061484] ccp 0000:0c:00.2: enabling device (0000 → 0002)
[ 5.061977] ccp 0000:0c:00.2: ccp enabled
[ 5.063726] asus_wmi: ASUS WMI generic driver loaded
[ 5.065456] cryptd: max_cpu_qlen set to 1000
[ 5.067857] asus_wmi: Initialization: 0x0
[ 5.067880] asus_wmi: BIOS WMI version: 0.9
[ 5.067912] asus_wmi: SFUN value: 0x0
[ 5.067914] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 5.068197] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input19
[ 5.124375] AVX2 version of gcm_enc/dec engaged.
[ 5.124376] AES CTR mode by8 optimization enabled
[ 5.223345] kvm: Nested Virtualization enabled
[ 5.223352] kvm: Nested Paging enabled
[ 5.223352] SVM: Virtual VMLOAD VMSAVE supported
[ 5.223352] SVM: Virtual GIF supported
[ 5.226993] MCE: In-kernel MCE decoding enabled.
[ 5.230033] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.230034] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.288443] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.288444] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.317193] systemd-journald[336]: Received request to flush runtime journal from PID 1
[ 5.360451] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.360453] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.403616] random: crng init done
[ 5.403618] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.448472] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.448473] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.520393] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.520394] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.592511] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.592512] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.664320] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.664321] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.673563] audit: type=1400 audit(1623077100.394:2): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/sbin/haveged" pid=578 comm=“apparmor_parser”
[ 5.681441] audit: type=1400 audit(1623077100.402:3): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/bin/man" pid=577 comm=“apparmor_parser”
[ 5.681444] audit: type=1400 audit(1623077100.402:4): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“man_filter” pid=577 comm=“apparmor_parser”
[ 5.681446] audit: type=1400 audit(1623077100.402:5): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“man_groff” pid=577 comm=“apparmor_parser”
[ 5.723790] audit: type=1400 audit(1623077100.442:6): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/sbin/tcpdump" pid=580 comm=“apparmor_parser”
[ 5.726285] audit: type=1400 audit(1623077100.446:7): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/sbin/dhclient" pid=575 comm=“apparmor_parser”
[ 5.726287] audit: type=1400 audit(1623077100.446:8): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=575 comm=“apparmor_parser”
[ 5.726288] audit: type=1400 audit(1623077100.446:9): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=575 comm=“apparmor_parser”
[ 5.726289] audit: type=1400 audit(1623077100.446:10): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/connman/scripts/dhclient-script" pid=575 comm=“apparmor_parser”
[ 5.728411] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.728413] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.808423] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.808424] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 5.908418] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.908419] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 6.004490] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.004491] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 6.084699] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.084700] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 11.676882] igb 0000:04:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 20.694200] nvidia: module license ‘NVIDIA’ taints kernel.
[ 20.694201] Disabling lock debugging due to kernel taint
[ 20.715776] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 20.716154] nvidia 0000:08:00.0: enabling device (0000 → 0003)
[ 20.716241] nvidia 0000:08:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 20.832213] nvidia 0000:0a:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 20.874002] nvidia 0000:0b:00.0: enabling device (0000 → 0003)
[ 20.874060] nvidia 0000:0b:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 20.989848] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 460.67 Thu Mar 11 00:11:45 UTC 2021
[ 21.006008] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.67 Thu Mar 11 00:03:18 UTC 2021
[ 21.008613] [drm] [nvidia-drm] [GPU ID 0x00000800] Loading driver
[ 22.105772] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 22.105773] [drm] No driver support for vblank timestamp query.
[ 22.112562] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:08:00.0 on minor 0
[ 22.112629] [drm] [nvidia-drm] [GPU ID 0x00000a00] Loading driver
[ 22.390409] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 22.390615] caller _nv000708rm+0x1af/0x200 [nvidia] mapping multiple BARs
[ 23.136422] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 23.136423] [drm] No driver support for vblank timestamp query.
[ 23.137214] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0a:00.0 on minor 1
[ 23.137301] [drm] [nvidia-drm] [GPU ID 0x00000b00] Loading driver
[ 24.008436] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 24.008437] [drm] No driver support for vblank timestamp query.
[ 24.009213] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0b:00.0 on minor 2
[ 36.078654] nvidia-uvm: Loaded the UVM driver, major device number 238.
[ 36.649894] logitech-hidpp-device 0003:046D:4074.0006: HID++ 4.2 device connected.
root@Klaus:/#

Hi klaus, there seems to be a problem with your ecc (just a broad guess)

[5.592512] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)

Blacklisting the kernel module might surpress the error, but i am not sure whether this might help. Another link at google suggests reordering yor ram sticks…
https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.thomas-krenn.com/de/wiki/EDAC_amd64_Node_0_DRAM_ECC_disabled&ved=2ahUKEwjKssa_qvbyAhWJ_7sIHemHBR8QFnoECAYQAQ&usg=AOvVaw2CW8gJe4xhnjduMaWpLTK9