Hey guys,
I just added an ASUS TUF Gaming RTX 3060 to my rig. It is displayed like this GA106 [GeForce RTX 3060 LHR] · ASUS and now neither other cards are mining. I do not know why is this happening. I’ll try reinstalling the HIVEOS and let you know what I get. Anyone experienced something like this? Should I also change the driver? I want to mine Ravencoin or Ergo with it.
Thanks,
Koala
As you said you have an lhr card and it shows up as ga 106 blah blah .Do not reinstall hive os. Update nvidia drivers to the latest on restart and the card will be detected fine.From there you can start mining anything you like. The best and most profitable coin on these cards is rvn coin. At the moment I’m mining rvn coin over locked and get 47.77 from 2 x 3060 lhr which is approximately 7$ per day. Not bad i think. Any help needed don’t hesitate to send
Hi @
So, if I well understood you got out 2x 3060 LHR 47.77 Mh/s
Considering 2x 3060 output 44.0 MH/s according to WhatToMine, this cards have nothing to do with “LHR”
It sounds like this cards have been labelled LHR to divert attention of miners.
Don’t they ?
No they actually are lhr 2504 v2 thats why I’m mining rvn coin
I have 2 x Inno3d 3060 lhr v2 and my settings are fan 100 core 300 mem 2000 pl 140
You can try them very stable for me. At the moment I’m trying some other settings to see if I can get more mh as soon as I try them I will share them with to try.
Was meaning they have nothing with “low” hashrate
Your hashrate are very correct, if not very good
Are they only “low” hashrate on ethash ?
Have tried on eth and it’s definitely limited on it. On ergo I haven’t tried.
wow .with the settings that I’m running right now it is 22 x 24 =528 mh
sometimes happens to me when rebooting, and I have to reboot a couple of times to be recognised.
Thanks guys for the help, it worked after I resintalled hiveos, but now my driver version is 460.84. My RTX 3060 V2 LHR is working on full hashrate only on RVN. Any idea what driver should I install to have full hashrate on ERG as well? I tried with 460.39 but my rig has gone wild and give the following error nvtool(137) and then I couldn’t reconnect my rig.
Those are my settings for ERG on a similar card with the latest driver, using lolminer:
-250 Core and --cckl 1305 on the flighsheet.
could u show me your miner settings? thanks. When I miner ergo with 3060 lhr, the hashrate is down from 100 to 70.
Thank goodness for the new NBMiner release 39.0.
RTX 3060 V2 LHR (EVGA)
08:00.0 "VGA compatible controller [0300]" "NVIDIA [10de]" "GA106 [GeForce RTX 3060 LHR] [2504]" -ra1 "EVGA [3842]" "Device [3656]"
08:00.1 "Audio device [0403]" "NVIDIA [10de]" "Device [228e]" -ra1 "EVGA [3842]" "Device [3656]"
09:00.0 "VGA compatible controller [0300]" "NVIDIA [10de]" "GA106 [GeForce RTX 3060 LHR] [2504]" -ra1 "EVGA [3842]" "Device [3656]"
09:00.1 "Audio device [0403]" "NVIDIA [10de]" "Device [228e]" -ra1 "EVGA [3842]" "Device [3656]"
HiveOS
5.4.0-hiveos #132 · H 0.6-207 · N 465.31
Algo: ETHASH
Hashrate: 34-35 MH/s
OC Settings:
Fan: 80
CClock Offset: -600
Mem Freq: 2600
PL: 140
=== GPU 4, 08:00.0 GeForce RTX 3060 12053 MB ===
Bios 94.06.25.00.63, PCIE Link Gen 2, PCIE Link Width 1x
Power Limit: Min 100.0 W, Default 170.0 W, Max 190.0 W, Current 140.0 W
Frequency: GFXCore 1222 MHz, MEMCore 8600 MHz
Memory: Total 12053 MB, Used 4677 MB, Free 7375 MB, Samsung GDDR6
Utilization: GPU 100 %, MEM 100 %
PSTATE P2, PWR 139.5 W, Temp 72 °C, Fan 80 %, RPM 2356 (80 %), RPM 2356 (80 %)
NBMiner Log
[03:30:15] INFO - ================ [nbminer v39.0] Summary 2021-08-16 03:30:15 ================
**[03:30:15] INFO - |ID|Device|Hashrate|Accept|Reject|Inv|Powr|Temp|Fan|CClk|GMClk|MUtl|Eff/Watt|**
**[03:30:15] INFO - | 4| 3060| 34.64 M| 7| 0| 0| 138| 74| 80|1215| 8600| 100| 251.0 K|**
**[03:30:15] INFO - | 5| 3060| 33.95 M| 6| 0| 0| 138| 62| 80|1312| 8600| 100| 246.0 K|**
**[03:30:15] INFO - |------------------+------+------+---+----+---------------------------------|**
**[03:30:15] INFO - | Total: 68.60 M| 13| 0| 0| 276| Uptime: 0D 00:14:02 CPU: 23% |**
NBMiner v39.0:
"lhr": "69,69"
"devices": "4,5"
"intensity": "100,100"
Using NBMiner config -lhr 70 will end up reactivating lock.
-lhr 69 is the highest I could get to be stable.
Happy Mining!
35+ @ 107 with MiniZ
Yeah, the goal is to get PWR down.
Which RTX3060 device id do you have?
Can you share OC settings please?
MiniZ 1.8y4?
Try 1447 2550 120
I got same problem with LHR 460.39 for mining ERGO.
The hive os could not boot at all.
Anyone has solution?
im looking for the same
You need to update the NVIDIA driver.
The updated LHR cards will not boot into HiveOS with driver 460.39
You will have to unplug the updated LHR cards and allow HiveOS to boot.
Then open the shell and type in: nvidia-driver-update --latest
Then power off and re-connect your cards and it should boot up.
The drivers I am running are: 460.91.03
What I have found is the original LHR cards will run at reduced hash rate:~100MH on ERGO
If I drop the driver down to 460.39 then the cards will run at: ~120MH on ERGO
I have split my LHR cards across 2 rigs
Original LHR cards on driver 460.39
Updated LHR cards on driver 460.91.03
The cards I am using are all EVGA GeForce RTX 3060 XC GAMING 12GB Video Card [12G-P5-3657-KR]
Let me know how you go.
Took me some mucking around to get it working.
Dan.