OS
Pool
ASIC Firmware
ASIC Hub
More
blog
Blog
News and Articles
forum
Forum
Top discussions, announcements, help
Show all articles
Referral Program
referral
Increase your income with Hive. Invite your friends and earn real cryptocurrency!
Get your referral link

RTX3060 12GB results here

Nvidia Cards
#41

The gpu cloc lock? Remember, its for octopus (conflux/CFX)

First bump up your power limit, for example 170. Don’t worry, the real power usage will drop after the next step.

Then use smi command in Hive Shell:
nvidia-smi -lgc 1550

1550 can be changed to your desired core clock, but I find 1550 pretty good). The power will drop to whatever the card needs, and stay below your power limit (as you can see in my screenshot)

Remember that this will change core clock of all the GPU’s in this rig.

Hope this helps

#42

oh of course. I was thinking these were eth hash rates.

Im mining cortex on my 3060 in my mixed rig but I cant get conflux to work for some reason.

#43

Yes me 2, can somebody help? It just won’t start mining

1 Like
#44

Can you share screenshots of the issue?

#45

Same Issue, the rtx3060 won’t start mining.! I have tried to reinstall, use another slot, (its from KFA2) Screenshot 2021-03-31 at 19.57.25|690x68

#46

Did you double check your miner config?

#47

did you mean hive os config? - i set rig id and password on startup. could not change rig.config on ssd from mac cause its read only drive.

#48

i have some addition infos if it helps:

Mainboard: Conda D1800 BTC 4 GB Ram, Intel Celeron J1800

#49

No i mean the miner config in your flight sheet.

Which miner software are you using? And which pool are you mining on?

#50

This article relates to non-3060 gpu’s that have already been sold such as the 3060 ti, 3070, 3080 and 3090.

RTX 3060 Hashrate Limiter Hacked For Windows...but what about HIVE OS LINUX?
#51

I have 2 RTX 3060 and a Asus Prime z590-p on Windows/HiveOn pool.
Dev Driver already installed.

As per the specs the MB it can run pcie x16 or x8/x8:
https://www.asus.com/Motherboards-Components/Motherboards/All-series/PRIME-Z590-P/

I actually configured it in the BIOS to run x8/x8 but I can’t get it to work properly.
First GPU: 49mh/s
Second GPU: 25mh/s

The first GPU that is running at 49mh/s is connected to a dummy HDMI and it drops to 25mh/s if I remove the dummy as expected.
The weird thing is that I have connected the monitor to the second GPU and I’m still getting 25mh/s.

What I’m I doing wrong???

#52

How did you manage to get the 3060s up and running? What is your version of Nvidia?

#53

Nothing wrong I guess, I can’t make it run at 48mh on the second pcie slot either, only the first one. even with only one card on the 2nd slot

#54

Did you read through the whole topic?

#55

It is not more profitable to buy 2-3 motherboards with 2-3 PCI x16 and mine in w10 ETH ??? 46-50 Mh/s ETH

#56

In youtube 7 x 3060 in 1 mother with risers pci x16 and dummys and 49Mh x 7 in ETH.

#57

ETH hash limiter. Card is good at other then ETH…

#58

yes for sure!
as far as I understand, only the first pcie, which is controled by the pcie lanes of the cpu can achieve 48mh/s with the 3060 12GB.
The second pcie, if controled by the chipset, doesn’t.

#59

My RTX 3060 12GB from Palit is dooing 26,56 MHs … on a Z77 mainboard

  • plugged in into first PCIE16 slot.
  • HDMI-Cable connected.
  • hivos 0.6-203@210403
  • N460.67Nvidia Driver

:frowning:

#60

Is there ANY way to put more than 2 RTX 3060’s in a single rig?
I saw above that GreenIce Tea put 8 3060’s in a rig.
Can anyone help? :slight_smile: